Always select Bias Point Detail. Every node is assigned a number, and there is always a ground node, which is Number 0. When done you will have something which looks like this: But when I worked with Capture, I find I can’t modify the model. The screen snapshot below shows the worst-case device values in Hi direction. Several companies have developed graphical user interfaces for Spice, which make it much easier to use. Finally, a title is added to the circuit click on “Place” and select “Text

pspice breakout library

Uploader: Aratilar
Date Added: 6 March 2008
File Size: 64.21 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 13815
Price: Free* [*Free Regsitration Required]

Short Tutorial on PSpice

We can also see the bias voltages at the nodes: To specifiy a tolerance rbeakout a resistor, first select the resistor, then right-click on it and select “Edit Properties The output from the simulation can be a text file, a plot, or both.

In the graph window plot V R1: This is the type of file Spice needs — it shows that Q1 is a 2N transistor, and its collector is connected to Node 2, its base to Node 1, and its emitter to Node 3.

You need to set this manually. To remove a wire or a part, select it and press the delete Del key. The most important libraries for Cicuits 1 and 2 are bbreakout.

Index of PSPICE Models

Specify the output variable and choose to vary devices that have device tolerances only no LOT tolerances. If need a component of the same type as one you have already placed, you can use the Draw — Place Part Ctrl-P shortcut. If you use M, PSpice will interpret this as milli 10 When you start up you will get a screen which looks like this: The PSpice Ground has symbolwhich is different from ordinary ground with symbol.


This will give a pulse input with a 0. To place more parts of the same type, move to the next location and click again at the location where you want the part to go.

pspice breakout library

For the simple example used here no parameters vary and thus no plot is generated. To draw a circuit, parts are placed on the schematic and then connected by wires. Can any one tell me how build a cmos circuit by using pspice Try placing mosfet from breakout library and Do edit model from schematic and define various model parameter.

pspice breakout library

In its original form you tell Spice what elements are in the circuit resistors, capacitors, etc. Then select part “0” as shown below. You can change the value of a component by double-clicking on the component value, and entering a new value. The standard Spice model assumes the 2N has a b of To enable wiring mode, click libary “Place” and pspiice select “Wire”, or click on the third vertical toolbar button.


I guess you are new to simulation and modeling so first you need to out about this a bit more.

Pspice breakout library

For some circuits the transient response is more important. If the part you want is not on the list, try another library — parts such as transistors will probably be in eval.

Have the source change from 0 V at You can connect components together by placing wires — Draw — Wire or Ctrl-W. Software Problems, Hints and Reviews:: Select Edit Instance Model Text: To rotate, mirror, or flip a part, or to end placing parts of this type right-click on the schematic and select the appropriate option.

Then generate a new PSpice simulation profile. The completed circuit, which is ready for analysis in PSpice, is shown in the following figure. The results that are obtained from a dc bias point analysis are the dc voltages across breakut elements, the dc currents through all elements, and the power absored or delivered by each element. These scale dactors are summarized in the following table.